Vented MTI Edge Metal™ - Designed for Moisture Control

VMEM 3168
Vented MTI Edge Metal Images

What Vented MTI Edge Metal does:

  • one of the only metal terminations on the market that is specifically designed to accommodate a rain screen drainage plane material and "weep."
  • Large 1" slots, placed frequently along bottom edge provide favorable egress points for moisture to exit thin veneer wall system.

How to install Vented MTI Edge Metal*

  • Install below foundation plate line - a minimum of four inches above the earth.
  • Make sure construction paper and Sure Cavity go inside the Vented MTI Edge Metal.

Ordering and Shipping Information

Product Number VMEM 3168
Piece Length (Feet) 8
Units per Tube 20
Linear Feet per Tube160

Contact MTI at 1-800-879-3348 for specific cost to your destination.

Vented MTI Edge Metal Specifications

26 gauge galvanized steel bent into J channel with a 85° angle. Vertical attachment flange - 3.656" (89 mm), ground - 0.5" (13 mm), bonding slots 1" (51mm) punched 0.25" (6 mm) apart, 8 ft long.

Product Cutsheet: Download Product Cut Sheet



Popular HyperSpecs® Wall Details featuring Vented MTI Edge Metal
Browse Wall Details | Browse Wall Details with Vented MTI Edge Metal

*The installation listed provides the most common installation instructions. For specific installation details please find your wall detail in our HyperSpecs library.